## Reconnect to the camera via Wi-Fi

### Operate the camera to initiate the Wi-Fi reconnection

#### MEMO

- The Wi-Fi adapter W-E1 is required to use the Wi-Fi function. Insert the Wi-Fi adapter into the camera's SD card slot to use it.

1. Press the camera's [MENU] button to display the menu.

2. On the MENU screen, select [Wi-Fi function] on the tab below.

3. Select [Connect to smartphone].

4. Check [Choose set.] and press [Connect].

5. Select [OK].

- The camera's screen enters the connection standby state.

### This concludes the camera operation.

##### Please close these instructions and proceed to the next screen.

#### MEMO

- If the camera's screen does not show the last connected smartphone's information, you need to re-register the camera again using the button in the upper left corner of the Camera Connect top screen.